Reef Dynamics Bio-Pellet Reactor for 135 gallon Systems: IN-SUMP USE ONLY

If you’re either using, or thinking of using, bio-pellets, Reef Dynamics has just changed the playing field. The new Reef Dynamics BPR135 Bio-Pellet reactor now takes using bio-pellets to a whole new level. Traditional bio-pellet reactors function by using a feed pump to tumble the bio-pellets, and a valve to control flow through the reactor. The inherent problem with this design, is that it does not allow you to control flow INDEPENDENTLY of the amount of tumbling. Meaning, if you want the media to tumble more, you’ll need to increase the flow through the reactor, and vice versa.

The all new Reef Dynamics line of Bio-Pellet reactors applies the same approach of a recirculating protein skimmers to bio-pellet reactors. This new line of bio-pellet reactors uses one pump to both circulate the water inside of the reactor suspending the pellets and feed the reactor at the same time. A completely separate valve controls the flow through the reactor. This allows you to increase or decrease the flow through the reactor, without dramatically impacting the tumble rate.

• Footprint: 4.5" x 9.5"
• Height: 20"
• Reaction Chamber Diameter: 3.5"
• Access: 2.5" Opening with easy access JAM-LOC quick disconnect.
• Bio-Load Capacity: +/- 135 gallons system volume
• Bio-Pellet Capacity: +/- 12oz (Bio-Pellets sold separately)
• Native Flow Through Rates: N/A
• Pump: Sicce Syncra 1.0
• Power Consumption: 16 watts@ 120VAC 60hz